CLEARTRAC7-MIB :: statAlarmModule

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCLEARTRAC7-MIBstatAlarmModule

statAlarmModule

Module: CLEARTRAC7-MIB

OID (symbolic): CLEARTRAC7-MIB::statAlarmModule

OID (numeric): 1.3.6.1.4.1.727.7.2.20.1.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The module who has detected the alarm.

What is statAlarmModule?

This read-only integer identifies which module on the unit detected this alarm. An admin uses it to isolate a fault to a specific hardware module rather than treating the alarm as system-wide. For example, statAlarmModule reporting module 2 tells the admin to focus troubleshooting on that specific module rather than the whole chassis.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.727.7.2.20.1.1.5
snmpwalk -v2c -c public <target> CLEARTRAC7-MIB::statAlarmModule

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.727.7.2.20.1.1.5.1
snmpget -v2c -c public <target> CLEARTRAC7-MIB::statAlarmModule.1

Start monitoring ClearTrac 7 series asset-tracking hardware with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CLEARTRAC7-MIB::statAlarmModule OID value, configure state conditions and alerts, and monitor any ClearTrac 7 series asset-tracking hardware from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.727lucentCLEARTRAC7-MIB
1.3.6.1.4.1.727.7cleartrac7CLEARTRAC7-MIB
1.3.6.1.4.1.727.7.2mgmtCLEARTRAC7-MIB
1.3.6.1.4.1.727.7.2.20statCLEARTRAC7-MIB
1.3.6.1.4.1.727.7.2.20.1statAlarmTableCLEARTRAC7-MIB
1.3.6.1.4.1.727.7.2.20.1.1statAlarmEntryCLEARTRAC7-MIB
1.3.6.1.4.1.727.7.2.20.1.1.5statAlarmModuleCLEARTRAC7-MIB