All MIBs › CLEARTRAC7-MIB › puDlsMaxFrame
puDlsMaxFrame
Module: CLEARTRAC7-MIB
OID (symbolic): CLEARTRAC7-MIB::puDlsMaxFrame
OID (numeric): 1.3.6.1.4.1.727.7.2.4.2.1.29
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: For all PU modes with a DLSW connection. Maximum frame size on the DLSw side of the connection, excluding SNA headers.
For an SDLC-DLSW connection, if the value of this parameter is equal to that of the puSdlcMaxFrame parameter, then no frame splitting will occur. On the other hand, if the value of this parameter is different from that of the puSdlcMaxFrame parameter, the unit will split the frames according to the smaller max frame value. The same is true of an LLC-DLSW connection, where the value of puDlsMaxFrame is compared to that of puLlcMaxFrame.
What is puDlsMaxFrame?
This read-write integer, applicable to all PU modes with a DLSW connection, sets the maximum frame size on the DLSw side of this PU's connection, excluding SNA headers, with the desc noting that for an SDLC-DLSW connection matching this to puSdlcMaxFrame avoids frame splitting. It controls whether frames must be fragmented when relaying between the DLSw tunnel side and the other side of this PU. For example, setting this object equal to puSdlcMaxFrame for an SDLC-DLSW PU avoids the overhead of splitting frames as they cross between the SDLC controller and the DLSw tunnel.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.727.7.2.4.2.1.29 snmpwalk -v2c -c public <target> CLEARTRAC7-MIB::puDlsMaxFrame
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.727.7.2.4.2.1.29.1 snmpget -v2c -c public <target> CLEARTRAC7-MIB::puDlsMaxFrame.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.727.7.2.4.2.1.29.1 i <value>
Start monitoring ClearTrac 7 series asset-tracking hardware with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CLEARTRAC7-MIB::puDlsMaxFrame OID value, configure state conditions and alerts, and monitor any ClearTrac 7 series asset-tracking hardware from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.727 | lucent | CLEARTRAC7-MIB |
| 1.3.6.1.4.1.727.7 | cleartrac7 | CLEARTRAC7-MIB |
| 1.3.6.1.4.1.727.7.2 | mgmt | CLEARTRAC7-MIB |
| 1.3.6.1.4.1.727.7.2.4 | pu | CLEARTRAC7-MIB |
| 1.3.6.1.4.1.727.7.2.4.2 | puTable | CLEARTRAC7-MIB |
| 1.3.6.1.4.1.727.7.2.4.2.1 | puEntry | CLEARTRAC7-MIB |
| 1.3.6.1.4.1.727.7.2.4.2.1.29 | puDlsMaxFrame | CLEARTRAC7-MIB |