All MIBs › CLEARTRAC7-MIB › ifwanPppConfigRetries
ifwanPppConfigRetries
Module: CLEARTRAC7-MIB
OID (symbolic): CLEARTRAC7-MIB::ifwanPppConfigRetries
OID (numeric): 1.3.6.1.4.1.727.7.2.2.2.1.123
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This parameter is a restart counter for Configure-Requests. It defines the maximum number of successive retry periods that can elapse when the port attempts to send a Configure-Request packet to the remote peer. The port counts the number of retry periods that elapse before receiving a Configure-Ack, Configure-Nak or Configure-Reject from the peer, until it assumes that the peer is unable to respond.
The values 0 to 254 set a finite number of retry periods. Use the value 255 to allow the port to send a Configure-Request packet an unlimited number of times.
What is ifwanPppConfigRetries?
This read-write value is the maximum number of Configure-Request retry attempts this PPP port will make while trying to establish LCP negotiation with a peer. It caps how persistently the port keeps retrying before giving up on bringing the link up, which helps distinguish a genuinely down link from a slow-to-respond one. For example, if the link to a remote router has intermittent noise, increasing this counter beyond its default lets the port survive a few lost Configure-Request packets instead of declaring the PPP session failed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.727.7.2.2.2.1.123 snmpwalk -v2c -c public <target> CLEARTRAC7-MIB::ifwanPppConfigRetries
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.727.7.2.2.2.1.123.1 snmpget -v2c -c public <target> CLEARTRAC7-MIB::ifwanPppConfigRetries.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.727.7.2.2.2.1.123.1 i <value>
Start monitoring ClearTrac 7 series asset-tracking hardware with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CLEARTRAC7-MIB::ifwanPppConfigRetries OID value, configure state conditions and alerts, and monitor any ClearTrac 7 series asset-tracking hardware from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.727 | lucent | CLEARTRAC7-MIB |
| 1.3.6.1.4.1.727.7 | cleartrac7 | CLEARTRAC7-MIB |
| 1.3.6.1.4.1.727.7.2 | mgmt | CLEARTRAC7-MIB |
| 1.3.6.1.4.1.727.7.2.2 | ifwan | CLEARTRAC7-MIB |
| 1.3.6.1.4.1.727.7.2.2.2 | ifwanTable | CLEARTRAC7-MIB |
| 1.3.6.1.4.1.727.7.2.2.2.1 | ifwanEntry | CLEARTRAC7-MIB |
| 1.3.6.1.4.1.727.7.2.2.2.1.123 | ifwanPppConfigRetries | CLEARTRAC7-MIB |