All MIBs › CLEARTRAC7-MIB › ifwanPppAcceptableAccmChar
ifwanPppAcceptableAccmChar
Module: CLEARTRAC7-MIB
OID (symbolic): CLEARTRAC7-MIB::ifwanPppAcceptableAccmChar
OID (numeric): 1.3.6.1.4.1.727.7.2.2.2.1.131
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: This parameter determines the exact characters of the Asynchronous Control Character Map that will be sent to the remote peer. The Async-Control-Character-Map field is 4 bytes, encoded such that each numbered bit corresponds to the ASCII control character of the same value. If a bit is cleared to zero, then the corresponding ASCII control character must remain mapped. For example, if bit 19 is set to zero, then ASCII control character 19 (CTRL-S) may be sent without change.
What is ifwanPppAcceptableAccmChar?
This read-write 4-byte OCTET STRING defines the ASCII control-character bitmap this port will send to the remote peer once it agrees to ACCM negotiation. It is the mirror of ifwanPppRequestedAccmChar, describing what this port itself is willing to keep escaped rather than what it is asking the peer to escape. For example, an administrator troubleshooting a dial link that drops certain bytes could clear the bits for those specific control characters in this object so the local port continues to escape them for the peer's benefit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.727.7.2.2.2.1.131 snmpwalk -v2c -c public <target> CLEARTRAC7-MIB::ifwanPppAcceptableAccmChar
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.727.7.2.2.2.1.131.1 snmpget -v2c -c public <target> CLEARTRAC7-MIB::ifwanPppAcceptableAccmChar.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.727.7.2.2.2.1.131.1 s <value>
Start monitoring ClearTrac 7 series asset-tracking hardware with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CLEARTRAC7-MIB::ifwanPppAcceptableAccmChar OID value, configure state conditions and alerts, and monitor any ClearTrac 7 series asset-tracking hardware from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.727 | lucent | CLEARTRAC7-MIB |
| 1.3.6.1.4.1.727.7 | cleartrac7 | CLEARTRAC7-MIB |
| 1.3.6.1.4.1.727.7.2 | mgmt | CLEARTRAC7-MIB |
| 1.3.6.1.4.1.727.7.2.2 | ifwan | CLEARTRAC7-MIB |
| 1.3.6.1.4.1.727.7.2.2.2 | ifwanTable | CLEARTRAC7-MIB |
| 1.3.6.1.4.1.727.7.2.2.2.1 | ifwanEntry | CLEARTRAC7-MIB |
| 1.3.6.1.4.1.727.7.2.2.2.1.131 | ifwanPppAcceptableAccmChar | CLEARTRAC7-MIB |