CLEARTRAC7-MIB :: ifwanMode

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCLEARTRAC7-MIBifwanMode

ifwanMode

Module: CLEARTRAC7-MIB

OID (symbolic): CLEARTRAC7-MIB::ifwanMode

OID (numeric): 1.3.6.1.4.1.727.7.2.2.2.1.21

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: For PVCR protocol only. Operating mode of the WAN link. This parameter defines the WAN link as a dedicated link, a backup link or a Bandwidth On Demand link. The ANSWER mode is used for the link that responds to calls. When you install a backup or Bandwidth On Demand (BOD) link between two units, one unit must be configured in call mode (CALL-BACKUP or CALL-BOD) and the other as ANSWER. The INACTIVE mode is used to turn off the link.

What is ifwanMode?

This read-write enumeration, applying to the PVCR protocol only, sets the WAN link's operating mode as inactive, dedicated, answer, call-backup, or a similar role, defining whether the link is always-on, a backup, or a Bandwidth On Demand path. An administrator configures matching modes on each end of a backup or BOD pair, with one unit set to answer for incoming calls and the other typically to a calling mode. For example, setting up a BOD pair would require one ClearTrac7 unit configured in call mode and the far-end unit configured in answer mode so the on-demand link can be established when needed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.727.7.2.2.2.1.21
snmpwalk -v2c -c public <target> CLEARTRAC7-MIB::ifwanMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.727.7.2.2.2.1.21.1
snmpget -v2c -c public <target> CLEARTRAC7-MIB::ifwanMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.727.7.2.2.2.1.21.1 i <value>

Start monitoring ClearTrac 7 series asset-tracking hardware with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CLEARTRAC7-MIB::ifwanMode OID value, configure state conditions and alerts, and monitor any ClearTrac 7 series asset-tracking hardware from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.727lucentCLEARTRAC7-MIB
1.3.6.1.4.1.727.7cleartrac7CLEARTRAC7-MIB
1.3.6.1.4.1.727.7.2mgmtCLEARTRAC7-MIB
1.3.6.1.4.1.727.7.2.2ifwanCLEARTRAC7-MIB
1.3.6.1.4.1.727.7.2.2.2ifwanTableCLEARTRAC7-MIB
1.3.6.1.4.1.727.7.2.2.2.1ifwanEntryCLEARTRAC7-MIB
1.3.6.1.4.1.727.7.2.2.2.1.21ifwanModeCLEARTRAC7-MIB