CISCOSB-rlBrgMulticast-MIB :: rlIgmpSnoopVlanLeaveTimeOut

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCOSB-rlBrgMulticast-MIBrlIgmpSnoopVlanLeaveTimeOut

rlIgmpSnoopVlanLeaveTimeOut

Module: CISCOSB-rlBrgMulticast-MIB

OID (symbolic): CISCOSB-rlBrgMulticast-MIB::rlIgmpSnoopVlanLeaveTimeOut

OID (numeric): 1.3.6.1.4.1.9.6.1.101.55.2.7.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the port of the entry.

What is rlIgmpSnoopVlanLeaveTimeOut?

This field sets, in seconds, how long the switch waits after receiving an IGMP leave or exclude message on a port before removing that port's multicast membership entry for this VLAN. An administrator lowers this to make channel changes or stream stops take effect on the wire more quickly after a client leaves a group. For example, reducing rlIgmpSnoopVlanLeaveTimeOut on an IPTV VLAN lets the switch stop forwarding a multicast stream to a port almost immediately after the set-top box sends a leave message.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.55.2.7.1.7
snmpwalk -v2c -c public <target> CISCOSB-rlBrgMulticast-MIB::rlIgmpSnoopVlanLeaveTimeOut

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.55.2.7.1.7.1
snmpget -v2c -c public <target> CISCOSB-rlBrgMulticast-MIB::rlIgmpSnoopVlanLeaveTimeOut.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.55.2.7.1.7.1 i <value>

Start monitoring Cisco Small Business (SB/SG series) switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-rlBrgMulticast-MIB::rlIgmpSnoopVlanLeaveTimeOut OID value, configure state conditions and alerts, and monitor any Cisco Small Business (SB/SG series) switch from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
1.3.6.1.4.1.9.6.1.101.55rlMacMulticastCISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.55.2rlIgmpSnoopCISCOSB-rlBrgMulticast-MIB
1.3.6.1.4.1.9.6.1.101.55.2.7rlIgmpSnoopVlanTableCISCOSB-rlBrgMulticast-MIB
1.3.6.1.4.1.9.6.1.101.55.2.7.1rlIgmpSnoopVlanEntryCISCOSB-rlBrgMulticast-MIB
1.3.6.1.4.1.9.6.1.101.55.2.7.1.7rlIgmpSnoopVlanLeaveTimeOutCISCOSB-rlBrgMulticast-MIB