CISCOSB-rlBrgMulticast-MIB :: rlIgmpMldSnoopVlanLeaveTimeOut

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCOSB-rlBrgMulticast-MIBrlIgmpMldSnoopVlanLeaveTimeOut

rlIgmpMldSnoopVlanLeaveTimeOut

Module: CISCOSB-rlBrgMulticast-MIB

OID (symbolic): CISCOSB-rlBrgMulticast-MIB::rlIgmpMldSnoopVlanLeaveTimeOut

OID (numeric): 1.3.6.1.4.1.9.6.1.101.55.5.5.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the port of the entry.

What is rlIgmpMldSnoopVlanLeaveTimeOut?

This field sets, in seconds, how long the switch waits after an IGMP or MLD leave/exclude message before removing a port's combined-table multicast membership entry for this VLAN. An administrator lowers this to make channel changes take effect quickly for either IPv4 or IPv6 multicast streams. For example, reducing rlIgmpMldSnoopVlanLeaveTimeOut lets an IPv6 multicast stream stop being forwarded to a port almost immediately after that client sends an MLD leave message.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.55.5.5.1.8
snmpwalk -v2c -c public <target> CISCOSB-rlBrgMulticast-MIB::rlIgmpMldSnoopVlanLeaveTimeOut

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.55.5.5.1.8.1
snmpget -v2c -c public <target> CISCOSB-rlBrgMulticast-MIB::rlIgmpMldSnoopVlanLeaveTimeOut.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.55.5.5.1.8.1 i <value>

Start monitoring Cisco Small Business (SB/SG series) switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-rlBrgMulticast-MIB::rlIgmpMldSnoopVlanLeaveTimeOut OID value, configure state conditions and alerts, and monitor any Cisco Small Business (SB/SG series) switch from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
1.3.6.1.4.1.9.6.1.101.55rlMacMulticastCISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.55.5rlMldSnoopCISCOSB-rlBrgMulticast-MIB
1.3.6.1.4.1.9.6.1.101.55.5.5rlIgmpMldSnoopVlanTableCISCOSB-rlBrgMulticast-MIB
1.3.6.1.4.1.9.6.1.101.55.5.5.1rlIgmpMldSnoopVlanEntryCISCOSB-rlBrgMulticast-MIB
1.3.6.1.4.1.9.6.1.101.55.5.5.1.8rlIgmpMldSnoopVlanLeaveTimeOutCISCOSB-rlBrgMulticast-MIB