CISCOSB-rlBrgMulticast-MIB :: rlIgmpMldSnoopVlanAdminLastMemberQueryCount

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCOSB-rlBrgMulticast-MIBrlIgmpMldSnoopVlanAdminLastMemberQueryCount

rlIgmpMldSnoopVlanAdminLastMemberQueryCount

Module: CISCOSB-rlBrgMulticast-MIB

OID (symbolic): CISCOSB-rlBrgMulticast-MIB::rlIgmpMldSnoopVlanAdminLastMemberQueryCount

OID (numeric): 1.3.6.1.4.1.9.6.1.101.55.5.5.1.28

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: Represents the number of group-specific and group-and-source-specific queries sent by the router before it assumes there are no local members. DEFVAL { rlIgmpMldSnoopVlanAdminRobustness }

What is rlIgmpMldSnoopVlanAdminLastMemberQueryCount?

This read-write value lets an administrator configure how many group-specific confirmation queries the switch sends after a leave message on this VLAN before assuming no members remain. An administrator lowers this count to cut off a departing multicast stream more quickly, or raises it for extra certainty on an unreliable subnet. For example, setting rlIgmpMldSnoopVlanAdminLastMemberQueryCount to 1 makes the switch stop forwarding a group's traffic after just a single unanswered confirmation query, rather than a higher default count.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.55.5.5.1.28
snmpwalk -v2c -c public <target> CISCOSB-rlBrgMulticast-MIB::rlIgmpMldSnoopVlanAdminLastMemberQueryCount

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.55.5.5.1.28.1
snmpget -v2c -c public <target> CISCOSB-rlBrgMulticast-MIB::rlIgmpMldSnoopVlanAdminLastMemberQueryCount.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.55.5.5.1.28.1 i <value>

Start monitoring Cisco Small Business (SB/SG series) switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-rlBrgMulticast-MIB::rlIgmpMldSnoopVlanAdminLastMemberQueryCount OID value, configure state conditions and alerts, and monitor any Cisco Small Business (SB/SG series) switch from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
1.3.6.1.4.1.9.6.1.101.55rlMacMulticastCISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.55.5rlMldSnoopCISCOSB-rlBrgMulticast-MIB
1.3.6.1.4.1.9.6.1.101.55.5.5rlIgmpMldSnoopVlanTableCISCOSB-rlBrgMulticast-MIB
1.3.6.1.4.1.9.6.1.101.55.5.5.1rlIgmpMldSnoopVlanEntryCISCOSB-rlBrgMulticast-MIB
1.3.6.1.4.1.9.6.1.101.55.5.5.1.28rlIgmpMldSnoopVlanAdminLastMemberQueryCountCISCOSB-rlBrgMulticast-MIB