CISCOSB-rlBrgMulticast-MIB :: rlIgmpMldSnoopQuerierAdminEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCOSB-rlBrgMulticast-MIBrlIgmpMldSnoopQuerierAdminEnable

rlIgmpMldSnoopQuerierAdminEnable

Module: CISCOSB-rlBrgMulticast-MIB

OID (symbolic): CISCOSB-rlBrgMulticast-MIB::rlIgmpMldSnoopQuerierAdminEnable

OID (numeric): 1.3.6.1.4.1.9.6.1.101.55.5.7.1.2

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: The desired administrative state of IGMP/MLD Snoop Querier on the vlan.

What is rlIgmpMldSnoopQuerierAdminEnable?

This read-write TruthValue sets whether the switch's combined IGMP/MLD Snoop Querier should be administratively enabled on a given VLAN, covering both address families. An administrator turns this on for VLANs lacking an upstream multicast router, so the switch itself generates the periodic queries needed to maintain both IPv4 and IPv6 membership state. For example, enabling rlIgmpMldSnoopQuerierAdminEnable on an isolated dual-stack VLAN lets the switch keep both IGMP and MLD membership state alive without a real router present.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.55.5.7.1.2
snmpwalk -v2c -c public <target> CISCOSB-rlBrgMulticast-MIB::rlIgmpMldSnoopQuerierAdminEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.55.5.7.1.2.1
snmpget -v2c -c public <target> CISCOSB-rlBrgMulticast-MIB::rlIgmpMldSnoopQuerierAdminEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.55.5.7.1.2.1 s <value>

Start monitoring Cisco Small Business (SB/SG series) switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-rlBrgMulticast-MIB::rlIgmpMldSnoopQuerierAdminEnable OID value, configure state conditions and alerts, and monitor any Cisco Small Business (SB/SG series) switch from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
1.3.6.1.4.1.9.6.1.101.55rlMacMulticastCISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.55.5rlMldSnoopCISCOSB-rlBrgMulticast-MIB
1.3.6.1.4.1.9.6.1.101.55.5.7rlIgmpMldSnoopQuerierVlanTableCISCOSB-rlBrgMulticast-MIB
1.3.6.1.4.1.9.6.1.101.55.5.7.1rlIgmpMldSnoopQuerierVlanEntryCISCOSB-rlBrgMulticast-MIB
1.3.6.1.4.1.9.6.1.101.55.5.7.1.2rlIgmpMldSnoopQuerierAdminEnableCISCOSB-rlBrgMulticast-MIB