All MIBs › CISCO-ZS-MIB › zoneMemberID
zoneMemberID
Module: CISCO-ZS-MIB
OID (symbolic): CISCO-ZS-MIB::zoneMemberID
OID (numeric): 1.3.6.1.4.1.9.9.294.1.1.11.1.5
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-create
Description:
This object represents the zone/alias member ID. The interpretation of this object depends on the zoneMemberFormat object.
If the value of corresponding instance of zoneMemberFormat object is 'wwn', then this object holds an 8 octet long Port WWN.
If the value of corresponding instance of zoneMemberFormat object is 'domainPort', then this object contains a 2 octet value. The first octet will represent the domain and the second octet will represent the port.
If the value of the corresponding instance of zoneMemberFormat object is 'fcAddr', then this object contains the 3 octet N_Port FC-ID.
If the value of the corresponding instance of zoneMemberFormat object is 'fwwn', then this object contains the 8 octet Fabric Port WWN.
If the value of the corresponding instance of zoneMemberFormat object is 'symNodeName', then this object contains a symbolic node name which could be of length 1 to 255 bytes.
If the value of corresponding instance of zoneMemberFormat object is 'intf', then this object will contain a 12 octet value which is a concatenation of 4 octets containing an interface index (ifIndex) encoded in network byte order, and 8 octets containing the WWN of a switch.
If the value of corresponding instance of zoneMemberFormat object is 'domainIntf', then this object will contain a 5 octet value which is a concatenation of 1 octet representing the domain and 4 octets representing an interface index (ifIndex) encoded in network byte order.
If the value of corresponding instance of zoneMemberFormat object is 'ipAddr', then this object will contain a 4 octet IP address value followed by an optional 4 octets of subnet mask.
If the value of corresponding instance of zoneMemberFormat object is 'ipAddrv6', then this object will contain a 16 octet IPv6 address value followed by an optional 4 octets of prefix length encoded in network byte order.
If the value of the corresponding instance of zoneMemberFormat object is 'deviceAlias', then this object contains a Device Alias which could be of length 1 to 64 bytes.
This object cannot be modified while the corresponding value of zoneMemberRowStatus object is 'active'.
What is zoneMemberID?
This holds an identifier string for a zone member within a Cisco security zone configuration. It uniquely tags each device or entity participating in a zone to enable management and grouping. An operator would use it to verify that a specific firewall or switch is correctly enrolled in its assigned security zone.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.294 | ciscoZsMIB | CISCO-ZS-MIB |
| 1.3.6.1.4.1.9.9.294.1 | ciscoZoningMIBObjects | CISCO-ZS-MIB |
| 1.3.6.1.4.1.9.9.294.1.1 | zoneConfiguration | CISCO-ZS-MIB |
| 1.3.6.1.4.1.9.9.294.1.1.11 | zoneMemberTable | CISCO-ZS-MIB |
| 1.3.6.1.4.1.9.9.294.1.1.11.1 | zoneMemberEntry | CISCO-ZS-MIB |
| 1.3.6.1.4.1.9.9.294.1.1.11.1.5 | zoneMemberID | CISCO-ZS-MIB |