All MIBs › CISCO-ZS-MIB › zoneEnforcedZoneQosPriority
zoneEnforcedZoneQosPriority
Module: CISCO-ZS-MIB
OID (symbolic): CISCO-ZS-MIB::zoneEnforcedZoneQosPriority
OID (numeric): 1.3.6.1.4.1.9.9.294.1.1.15.1.7
Node type: OBJECT-TYPE
Type: ZoneQosPriorityLevel
Access: read-only
Description:
This object indicates the priority of qos if it is a qos enabled zone. This object was copied from the zoneQosPriority object in the zoneTable at the time when the currently active zone set was activated.
What is zoneEnforcedZoneQosPriority?
This OID stores the quality-of-service priority level currently active for an enforced security zone on the device. It reflects what traffic priority is in effect for that security zone. An operator checks this to verify that traffic in a particular security zone is being prioritized correctly according to policy.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.294.1.1.15.1.7 snmpwalk -v2c -c public <target> CISCO-ZS-MIB::zoneEnforcedZoneQosPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.294.1.1.15.1.7.1 snmpget -v2c -c public <target> CISCO-ZS-MIB::zoneEnforcedZoneQosPriority.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.294 | ciscoZsMIB | CISCO-ZS-MIB |
| 1.3.6.1.4.1.9.9.294.1 | ciscoZoningMIBObjects | CISCO-ZS-MIB |
| 1.3.6.1.4.1.9.9.294.1.1 | zoneConfiguration | CISCO-ZS-MIB |
| 1.3.6.1.4.1.9.9.294.1.1.15 | zoneEnforcedZoneTable | CISCO-ZS-MIB |
| 1.3.6.1.4.1.9.9.294.1.1.15.1 | zoneEnforcedZoneEntry | CISCO-ZS-MIB |
| 1.3.6.1.4.1.9.9.294.1.1.15.1.7 | zoneEnforcedZoneQosPriority | CISCO-ZS-MIB |