CISCO-ZS-MIB :: zoneEnforcedZoneMemberAttr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-ZS-MIBzoneEnforcedZoneMemberAttr

zoneEnforcedZoneMemberAttr

Module: CISCO-ZS-MIB

OID (symbolic): CISCO-ZS-MIB::zoneEnforcedZoneMemberAttr

OID (numeric): 1.3.6.1.4.1.9.9.294.1.1.19.1.4

Node type: OBJECT-TYPE

Type: ZoneMemberDeviceTypeAttr

Access: read-only

Description: This object specifies the member attribute that is configured for a zone member. This object was copied from the zoneMemberAttr object in the zoneMemberEntry at the time when the currently active zone set was activated. This can only be configured if smart zoning is enabled for the VSAN

What is zoneEnforcedZoneMemberAttr?

This read-only ZoneMemberDeviceTypeAttr reports the device-type attribute configured for an enforced zone member, copied from zoneMemberAttr at the time the active zone set was activated, and only meaningful when smart zoning is enabled on the VSAN. It helps an admin confirm whether the switch is treating a member as an initiator, target, or both when smart zoning automatically builds effective pairings. For example, if smart zoning is on, an admin checks this object to verify a host HBA is correctly tagged as an initiator rather than a target.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.294.1.1.19.1.4
snmpwalk -v2c -c public <target> CISCO-ZS-MIB::zoneEnforcedZoneMemberAttr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.294.1.1.19.1.4.1
snmpget -v2c -c public <target> CISCO-ZS-MIB::zoneEnforcedZoneMemberAttr.1

Start monitoring Cisco MDS 9148V/9396V Fibre Channel switches (zoning) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ZS-MIB::zoneEnforcedZoneMemberAttr OID value, configure state conditions and alerts, and monitor any Cisco MDS 9148V/9396V Fibre Channel switches (zoning) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.294ciscoZsMIBCISCO-ZS-MIB
1.3.6.1.4.1.9.9.294.1ciscoZoningMIBObjectsCISCO-ZS-MIB
1.3.6.1.4.1.9.9.294.1.1zoneConfigurationCISCO-ZS-MIB
1.3.6.1.4.1.9.9.294.1.1.19zoneEnforcedZoneMemberTableCISCO-ZS-MIB
1.3.6.1.4.1.9.9.294.1.1.19.1zoneEnforcedZoneMemberEntryCISCO-ZS-MIB
1.3.6.1.4.1.9.9.294.1.1.19.1.4zoneEnforcedZoneMemberAttrCISCO-ZS-MIB