All MIBs › CISCO-ZS-MIB › zoneDefaultZoneQos
zoneDefaultZoneQos
Module: CISCO-ZS-MIB
OID (symbolic): CISCO-ZS-MIB::zoneDefaultZoneQos
OID (numeric): 1.3.6.1.4.1.9.9.294.1.1.1.1.3
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object specifies if qos attribute for the default zone on this VSAN is enabled. If this object is set to 'true', then qos attribute for the default zone on this VSAN is enabled. If this object is set to 'false', then qos attribute for the default zone on this VSAN is disabled.
If this attribute is enabled for this default zone, then only traffic with the configured priority level will be allowed between the members of this default zone. The priority can be specified by means of the corresponding instance of zoneDefaultZoneQosPriority object.
What is zoneDefaultZoneQos?
This read-write TruthValue enables or disables the QoS attribute for the default zone on a VSAN; when enabled, only traffic at the configured priority level is allowed between default-zone members. Admins use it to enforce priority-based traffic control even for devices that fall into the fabric's default zone rather than an explicit zone. For example, an admin wanting consistent QoS enforcement fabric-wide, including devices left in the default zone, would enable this object and set an appropriate priority via zoneDefaultZoneQosPriority.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.294.1.1.1.1.3 snmpwalk -v2c -c public <target> CISCO-ZS-MIB::zoneDefaultZoneQos
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.294.1.1.1.1.3.1 snmpget -v2c -c public <target> CISCO-ZS-MIB::zoneDefaultZoneQos.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.294.1.1.1.1.3.1 s <value>
Start monitoring Cisco MDS 9148V/9396V Fibre Channel switches (zoning) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ZS-MIB::zoneDefaultZoneQos OID value, configure state conditions and alerts, and monitor any Cisco MDS 9148V/9396V Fibre Channel switches (zoning) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.294 | ciscoZsMIB | CISCO-ZS-MIB |
| 1.3.6.1.4.1.9.9.294.1 | ciscoZoningMIBObjects | CISCO-ZS-MIB |
| 1.3.6.1.4.1.9.9.294.1.1 | zoneConfiguration | CISCO-ZS-MIB |
| 1.3.6.1.4.1.9.9.294.1.1.1 | zoneDefaultZoneTable | CISCO-ZS-MIB |
| 1.3.6.1.4.1.9.9.294.1.1.1.1 | zoneDefaultZoneEntry | CISCO-ZS-MIB |
| 1.3.6.1.4.1.9.9.294.1.1.1.1.3 | zoneDefaultZoneQos | CISCO-ZS-MIB |