CISCO-ZS-MIB :: zoneCopyServerAddr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-ZS-MIBzoneCopyServerAddr

zoneCopyServerAddr

Module: CISCO-ZS-MIB

OID (symbolic): CISCO-ZS-MIB::zoneCopyServerAddr

OID (numeric): 1.3.6.1.4.1.9.9.294.1.1.31.1.4

Node type: OBJECT-TYPE

Type: InetAddress

Access: read-create

Description: The ip address of the remote device to which the active zoneset on this VSAN needs to be copied. This object must be set to a valid value when the corresponding instance of zoneCopyDestFileType is set to 'networkFile' before the copy can be initiated by means of the zoneCopyStartCopy object.

The protocol to be used for the copy operation is specified by the value of the corresponding instance of zoneCopyProto object.

What is zoneCopyServerAddr?

This read-create InetAddress holds the IP address of the remote device the active zone set on this VSAN will be copied to; it must be set to a valid value when zoneCopyDestFileType is 'networkFile' before zoneCopyStartCopy can initiate the transfer, and the protocol used is governed by zoneCopyProto. An admin uses this to point the switch at a specific backup or configuration-management server. For example, the admin sets this object to the address of a central SAN configuration repository before triggering a nightly zone set copy.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.294ciscoZsMIBCISCO-ZS-MIB
1.3.6.1.4.1.9.9.294.1ciscoZoningMIBObjectsCISCO-ZS-MIB
1.3.6.1.4.1.9.9.294.1.1zoneConfigurationCISCO-ZS-MIB
1.3.6.1.4.1.9.9.294.1.1.31zoneCopyTableCISCO-ZS-MIB
1.3.6.1.4.1.9.9.294.1.1.31.1zoneCopyEntryCISCO-ZS-MIB
1.3.6.1.4.1.9.9.294.1.1.31.1.4zoneCopyServerAddrCISCO-ZS-MIB