CISCO-WIRELESS-IF-MIB :: cwrUnAvailableSeconds

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-IF-MIBcwrUnAvailableSeconds

cwrUnAvailableSeconds

Module: CISCO-WIRELESS-IF-MIB

OID (symbolic): CISCO-WIRELESS-IF-MIB::cwrUnAvailableSeconds

OID (numeric): 1.3.6.1.4.1.9.9.136.1.6.2.1.2

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: This object represents the number of seconds that the link was not available for use. It is equal to: Severely Errored Seconds + Sync Loss Seconds.

What is cwrUnAvailableSeconds?

This read-only Counter32 tallies the number of seconds the link was not available for use, calculated as Severely Errored Seconds plus Sync Loss Seconds. It gives an admin a direct measure of link downtime contributed by both severe RF errors and outright loss of synchronization. For example, a sudden jump in cwrUnAvailableSeconds during a storm would prompt an admin to check cwrSyncLossSeconds to see whether the outage was driven by sync loss rather than codeword errors.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.6.2.1.2
snmpwalk -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrUnAvailableSeconds

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.6.2.1.2.1
snmpget -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrUnAvailableSeconds.1

Start monitoring Cisco wireless point-to-point radio/bridge equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-IF-MIB::cwrUnAvailableSeconds OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-point radio/bridge equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.136ciscoWirelessIfMIBCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1cwrRadioMibObjectsCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.6cwrRadioMetricsGroupCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.6.2cwrCumulativeMetricsTableCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.6.2.1cwrCumulativeMetricsEntryCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.6.2.1.2cwrUnAvailableSecondsCISCO-WIRELESS-IF-MIB