CISCO-WIRELESS-IF-MIB :: cwrTxPower

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-IF-MIBcwrTxPower

cwrTxPower

Module: CISCO-WIRELESS-IF-MIB

OID (symbolic): CISCO-WIRELESS-IF-MIB::cwrTxPower

OID (numeric): 1.3.6.1.4.1.9.9.136.1.3.2.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object represents the power that the antenna will transmit. The minimum average transmit power for the U-NII or MMDS band is 0.01 microwatts (-80 dBm). Maximum average transmit power: For the MMDS band is 2 Watts i.e. (+33dBm). For the U-NII band is 100 milliwatts i.e. (+20dBm). The power is specified in dBm.

What is cwrTxPower?

This read-write INTEGER, in dBm, ranging from -80 to 50, represents the power level the antenna will transmit at, with regulatory maximums such as +33dBm for MMDS or +20dBm for U-NII band. An admin tunes this to meet the link budget for the path distance while staying within the regulatory ceiling for the operating band. For example, on a long point-to-point hop in the U-NII band, an admin would set cwrTxPower as close to the +20dBm regulatory maximum as needed to close the link.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.3.2.1.7
snmpwalk -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrTxPower

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.3.2.1.7.1
snmpget -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrTxPower.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.136.1.3.2.1.7.1 i <value>

Start monitoring Cisco wireless point-to-point radio/bridge equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-IF-MIB::cwrTxPower OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-point radio/bridge equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.136ciscoWirelessIfMIBCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1cwrRadioMibObjectsCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.3cwrRadioBaseGroupCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.3.2cwrRadioPhyTableCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.3.2.1cwrRadioPhyEntryCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.3.2.1.7cwrTxPowerCISCO-WIRELESS-IF-MIB