All MIBs › CISCO-WIRELESS-IF-MIB › cwrThreshLimitTime
cwrThreshLimitTime
Module: CISCO-WIRELESS-IF-MIB
OID (symbolic): CISCO-WIRELESS-IF-MIB::cwrThreshLimitTime
OID (numeric): 1.3.6.1.4.1.9.9.136.1.8.1.1.7
Node type: OBJECT-TYPE
Type: TimeInterval
Access: read-create
Description: This object specifies the amount of time for which the radio signal should stabilize before a trap is sent to indicate that the radio signal has stabilized.
What is cwrThreshLimitTime?
A TimeInterval, read-create, specifying how long the monitored radio signal must remain stable before the device sends a trap confirming the signal has stabilized. This lets a management station distinguish a momentary blip from a genuinely resolved condition, avoiding a premature all-clear notification. For example, setting cwrThreshLimitTime to 60 seconds means the stabilization trap fires only after the signal has held steady for a full minute following an earlier threshold-crossing alarm.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.136 | ciscoWirelessIfMIB | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1 | cwrRadioMibObjects | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.8 | cwrRadioTimelineGroup | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.8.1 | cwrThresholdTable | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.8.1.1 | cwrThresholdEntry | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.8.1.1.7 | cwrThreshLimitTime | CISCO-WIRELESS-IF-MIB |