CISCO-WIRELESS-IF-MIB :: cwrSyncLossSeconds

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-IF-MIBcwrSyncLossSeconds

cwrSyncLossSeconds

Module: CISCO-WIRELESS-IF-MIB

OID (symbolic): CISCO-WIRELESS-IF-MIB::cwrSyncLossSeconds

OID (numeric): 1.3.6.1.4.1.9.9.136.1.6.2.1.3

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: This object represents the number of Link Admin Up Seconds during which the radio link was out of sync with the remote end.

What is cwrSyncLossSeconds?

This read-only Counter32 tallies the number of Link Admin Up seconds during which the radio link was out of sync with the remote end. It's a component of cwrUnAvailableSeconds and gives an admin a specific measure of how much downtime is attributable purely to synchronization loss rather than error-correction failures. For example, if cwrUnAvailableSeconds is high but cwrSyncLossSeconds accounts for nearly all of it, an admin would focus troubleshooting on frequency alignment or antenna aiming rather than ARQ tuning.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.6.2.1.3
snmpwalk -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrSyncLossSeconds

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.6.2.1.3.1
snmpget -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrSyncLossSeconds.1

Start monitoring Cisco wireless point-to-point radio/bridge equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-IF-MIB::cwrSyncLossSeconds OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-point radio/bridge equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.136ciscoWirelessIfMIBCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1cwrRadioMibObjectsCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.6cwrRadioMetricsGroupCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.6.2cwrCumulativeMetricsTableCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.6.2.1cwrCumulativeMetricsEntryCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.6.2.1.3cwrSyncLossSecondsCISCO-WIRELESS-IF-MIB