All MIBs › CISCO-WIRELESS-IF-MIB › cwrSelfTest
cwrSelfTest
Module: CISCO-WIRELESS-IF-MIB
OID (symbolic): CISCO-WIRELESS-IF-MIB::cwrSelfTest
OID (numeric): 1.3.6.1.4.1.9.9.136.1.3.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies the whether self test should be executed and if so whether to do it every time the radio link is started. Any changes made to this object will reflected the next time the radio link is started.
off(1) - Self test never performed. once(2) - Self test will be performed the next time the radio link is started. always(3) - Every time the radio link is started.
What is cwrSelfTest?
This read-write INTEGER (off, once, or always) controls whether the radio's self test runs, and if so whether it runs every time the radio link starts or just the next time. It gives an admin control over diagnostic overhead versus assurance, since a change here only takes effect the next time the link starts. For example, when troubleshooting an intermittently faulty radio, a technician could set cwrSelfTest to always(3) so every link restart re-validates the hardware.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.3.1.1.3 snmpwalk -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrSelfTest
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.3.1.1.3.1 snmpget -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrSelfTest.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.136.1.3.1.1.3.1 i <value>
Start monitoring Cisco wireless point-to-point radio/bridge equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-IF-MIB::cwrSelfTest OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-point radio/bridge equipment (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.136 | ciscoWirelessIfMIB | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1 | cwrRadioMibObjects | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.3 | cwrRadioBaseGroup | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.3.1 | cwrRadioBaseTable | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.3.1.1 | cwrRadioBaseEntry | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.3.1.1.3 | cwrSelfTest | CISCO-WIRELESS-IF-MIB |