CISCO-WIRELESS-IF-MIB :: cwrScopePortOn

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-IF-MIBcwrScopePortOn

cwrScopePortOn

Module: CISCO-WIRELESS-IF-MIB

OID (symbolic): CISCO-WIRELESS-IF-MIB::cwrScopePortOn

OID (numeric): 1.3.6.1.4.1.9.9.136.1.1.1.2.1.1

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: If set to true(1), then the DSP identified by cwrScopePortDsp, will redirect a portion of the output signal for the attribute identified by cwrScopeAttribute to the scope port.

What is cwrScopePortOn?

A read-write TruthValue that, when set true, tells the DSP identified by cwrScopePortDsp to redirect a portion of the signal for the attribute in cwrScopePortAttribute out to a physical scope port. This is a hardware debug feature letting a technician physically probe the live signal with an external oscilloscope rather than relying solely on SNMP-reported statistics. For example, a field technician diagnosing a subtle RF issue could enable cwrScopePortOn, plug an oscilloscope into the scope port, and directly view the waveform of the attribute selected by cwrScopePortAttribute.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.1.1.2.1.1
snmpwalk -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrScopePortOn

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.1.1.2.1.1.1
snmpget -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrScopePortOn.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.136.1.1.1.2.1.1.1 s <value>

Start monitoring Cisco wireless point-to-point radio/bridge equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-IF-MIB::cwrScopePortOn OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-point radio/bridge equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.136ciscoWirelessIfMIBCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1cwrRadioMibObjectsCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.1cwrRadioInternalCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.1.1cwrTestGroupCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.1.1.2cwrScopePortTableCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.1.1.2.1cwrScopePortEntryCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.1.1.2.1.1cwrScopePortOnCISCO-WIRELESS-IF-MIB