All MIBs › CISCO-WIRELESS-IF-MIB › cwrScopePortDsp
cwrScopePortDsp
Module: CISCO-WIRELESS-IF-MIB
OID (symbolic): CISCO-WIRELESS-IF-MIB::cwrScopePortDsp
OID (numeric): 1.3.6.1.4.1.9.9.136.1.1.1.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This identifies the DSP that should redirect a portion of the signal data to the scope port.
What is cwrScopePortDsp?
A read-write INTEGER (1..8) identifying which DSP is responsible for redirecting its signal data out to the physical scope port. On a multi-DSP card this selects which radio chain's live signal a technician gets to observe externally. For example, to inspect the signal on the second radio chain specifically, an admin would set cwrScopePortDsp to 2 before enabling cwrScopePortOn.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.1.1.2.1.2 snmpwalk -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrScopePortDsp
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.1.1.2.1.2.1 snmpget -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrScopePortDsp.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.136.1.1.1.2.1.2.1 i <value>
Start monitoring Cisco wireless point-to-point radio/bridge equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-IF-MIB::cwrScopePortDsp OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-point radio/bridge equipment (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.136 | ciscoWirelessIfMIB | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1 | cwrRadioMibObjects | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.1 | cwrRadioInternal | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.1.1 | cwrTestGroup | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.1.1.2 | cwrScopePortTable | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.1.1.2.1 | cwrScopePortEntry | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.1.1.2.1.2 | cwrScopePortDsp | CISCO-WIRELESS-IF-MIB |