All MIBs › CISCO-WIRELESS-IF-MIB › cwrRxFrequency
cwrRxFrequency
Module: CISCO-WIRELESS-IF-MIB
OID (symbolic): CISCO-WIRELESS-IF-MIB::cwrRxFrequency
OID (numeric): 1.3.6.1.4.1.9.9.136.1.3.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object represents the center frequency that will be used to receive transmissions over the radio PHY. The specified receive frequency must match the operating band and the capability of the RF resource connected to the radio. The transmit frequency at the local end must be identical to the receive frequency at the remote end for a wireless link to be established.
What is cwrRxFrequency?
This read-write INTEGER, in units of 10kHz, up to 6,000,000, specifies the center frequency used to receive over the radio PHY; the local transmit frequency must equal the remote end's receive frequency for the link to establish. An admin sets this as the other half of a frequency-plan pair alongside cwrTxFrequency. For example, if the far-end radio transmits at a given frequency, the admin must set this radio's cwrRxFrequency to that exact same value or the link will never synchronize.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.3.2.1.6 snmpwalk -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrRxFrequency
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.3.2.1.6.1 snmpget -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrRxFrequency.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.136.1.3.2.1.6.1 i <value>
Start monitoring Cisco wireless point-to-point radio/bridge equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-IF-MIB::cwrRxFrequency OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-point radio/bridge equipment (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.136 | ciscoWirelessIfMIB | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1 | cwrRadioMibObjects | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.3 | cwrRadioBaseGroup | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.3.2 | cwrRadioPhyTable | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.3.2.1 | cwrRadioPhyEntry | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.3.2.1.6 | cwrRxFrequency | CISCO-WIRELESS-IF-MIB |