All MIBs › CISCO-WIRELESS-IF-MIB › cwrRfControlChannelStatus
cwrRfControlChannelStatus
Module: CISCO-WIRELESS-IF-MIB
OID (symbolic): CISCO-WIRELESS-IF-MIB::cwrRfControlChannelStatus
OID (numeric): 1.3.6.1.4.1.9.9.136.1.5.1.1.16
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Each RF resource has an associated control channel. The control channel is used to send/receive control information to the RF resource. For the RF resouce to operate properly, the control channel must be established. This object indicates the status of the control channel ok(1) - RF resource may be controlled successfully notOk(2) - Cannot talk to the RF resource.
What is cwrRfControlChannelStatus?
This read-only INTEGER (ok or notOk) reports the status of the control channel used to send and receive control information to the RF resource, which must be established for the RF resource to be manageable; notOk(2) means the system cannot talk to the RF resource at all. An admin treats a notOk reading as a management-connectivity problem distinct from the RF resource's actual transmit/receive performance. For example, if cwrRfControlChannelStatus reads notOk, an admin would know that other RF-related readings for that resource may be stale or unavailable because the control link to it is broken.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.5.1.1.16 snmpwalk -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrRfControlChannelStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.5.1.1.16.1 snmpget -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrRfControlChannelStatus.1
Start monitoring Cisco wireless point-to-point radio/bridge equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-IF-MIB::cwrRfControlChannelStatus OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-point radio/bridge equipment (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.136 | ciscoWirelessIfMIB | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1 | cwrRadioMibObjects | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.5 | cwrRadioFreqResGroup | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.5.1 | cwrRfTable | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.5.1.1 | cwrRfEntry | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.5.1.1.16 | cwrRfControlChannelStatus | CISCO-WIRELESS-IF-MIB |