CISCO-WIRELESS-IF-MIB :: cwrLinkHighCwDSThresh

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-IF-MIBcwrLinkHighCwDSThresh

cwrLinkHighCwDSThresh

Module: CISCO-WIRELESS-IF-MIB

OID (symbolic): CISCO-WIRELESS-IF-MIB::cwrLinkHighCwDSThresh

OID (numeric): 1.3.6.1.4.1.9.9.136.1.6.1.1.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This object specifies high degraded second threshold. When then number of codeword errors detected are greater than this value then that second is counted as a Codeword Severely Errored Second.

What is cwrLinkHighCwDSThresh?

This read-write Unsigned32 sets the codeword-error-count boundary above which a second is counted as a Codeword Severely Errored Second, rather than merely a Codeword Degraded Second as governed by cwrLinkLowCwDSThresh. An admin tunes this to define what level of error activity constitutes a serious, rather than minor, quality event on the link. For example, lowering cwrLinkHighCwDSThresh would make the link classify a smaller number of codeword errors per second as severely errored, triggering that classification sooner.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.6.1.1.3
snmpwalk -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrLinkHighCwDSThresh

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.6.1.1.3.1
snmpget -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrLinkHighCwDSThresh.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.136.1.6.1.1.3.1 i <value>

Start monitoring Cisco wireless point-to-point radio/bridge equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-IF-MIB::cwrLinkHighCwDSThresh OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-point radio/bridge equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.136ciscoWirelessIfMIBCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1cwrRadioMibObjectsCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.6cwrRadioMetricsGroupCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.6.1cwrLinkMetricsThresholdTableCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.6.1.1cwrLinkMetricsThreshEntryCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.6.1.1.3cwrLinkHighCwDSThreshCISCO-WIRELESS-IF-MIB