All MIBs › CISCO-WIRELESS-IF-MIB › cwrLink24HrESAlarmThresh
cwrLink24HrESAlarmThresh
Module: CISCO-WIRELESS-IF-MIB
OID (symbolic): CISCO-WIRELESS-IF-MIB::cwrLink24HrESAlarmThresh
OID (numeric): 1.3.6.1.4.1.9.9.136.1.6.1.1.9
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the 24 hour Codeword Error Second threshold. When the number of Codeword Error Seconds in a 24 Operational Hour period exceeds this limit cwrTrapLink24HrThresh trap will be generated. Time measurement starts after the first operational second.
What is cwrLink24HrESAlarmThresh?
This read-write Unsigned32 sets the number of Codeword Error Seconds allowed within a rolling 24 operational hour period before the cwrTrapLink24HrThresh trap is generated, with the measurement window starting after the first operational second. It's the daily-window counterpart to cwrLink1HrESAlarmThresh, letting an admin catch a link whose error rate is unremarkable hour-to-hour but adds up over a full day. For example, an admin doing daily link-quality review would use cwrLink24HrESAlarmThresh to catch cumulative error activity that a single hour's alarm threshold might not flag.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.6.1.1.9 snmpwalk -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrLink24HrESAlarmThresh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.6.1.1.9.1 snmpget -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrLink24HrESAlarmThresh.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.136.1.6.1.1.9.1 i <value>
Start monitoring Cisco wireless point-to-point radio/bridge equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-IF-MIB::cwrLink24HrESAlarmThresh OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-point radio/bridge equipment (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.136 | ciscoWirelessIfMIB | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1 | cwrRadioMibObjects | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.6 | cwrRadioMetricsGroup | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.6.1 | cwrLinkMetricsThresholdTable | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.6.1.1 | cwrLinkMetricsThreshEntry | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.6.1.1.9 | cwrLink24HrESAlarmThresh | CISCO-WIRELESS-IF-MIB |