CISCO-WIRELESS-IF-MIB :: cwrIfRxOscState

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-IF-MIBcwrIfRxOscState

cwrIfRxOscState

Module: CISCO-WIRELESS-IF-MIB

OID (symbolic): CISCO-WIRELESS-IF-MIB::cwrIfRxOscState

OID (numeric): 1.3.6.1.4.1.9.9.136.1.5.2.1.2

Node type: OBJECT-TYPE

Type: CwrOscState

Access: read-only

Description: This object represents the state of the IF receive oscillator. The oscillator must be in oscillatorOk(1) state for the system to function properly.

What is cwrIfRxOscState?

This read-only CwrOscState reports the state of the intermediate-frequency (IF) receive oscillator, which must read oscillatorOk(1) for the system to function properly. It gives an admin a way to isolate an IF-stage receive oscillator fault from an RF-stage one when diagnosing a receive problem. For example, if a link's receive side is unstable and cwrRfRxOscState looks fine, an admin would next check cwrIfRxOscState to see if the fault instead lies in the IF receive oscillator.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.5.2.1.2
snmpwalk -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrIfRxOscState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.5.2.1.2.1
snmpget -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrIfRxOscState.1

Start monitoring Cisco wireless point-to-point radio/bridge equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-IF-MIB::cwrIfRxOscState OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-point radio/bridge equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.136ciscoWirelessIfMIBCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1cwrRadioMibObjectsCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.5cwrRadioFreqResGroupCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.5.2cwrIntFreqTableCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.5.2.1cwrIntFreqEntryCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.5.2.1.2cwrIfRxOscStateCISCO-WIRELESS-IF-MIB