All MIBs › CISCO-WIRELESS-IF-MIB › cwrArqPctBw
cwrArqPctBw
Module: CISCO-WIRELESS-IF-MIB
OID (symbolic): CISCO-WIRELESS-IF-MIB::cwrArqPctBw
OID (numeric): 1.3.6.1.4.1.9.9.136.1.4.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies the percentage of the total radio PHY bandwidth available to the ARQ engine. Some or all of this allocated bandwidth is used to when detected errors are corrected. The percentage will be approximated to the closest value supported by the ARQ engine.
What is cwrArqPctBw?
This read-write INTEGER, in units of 0.01 percent, from 1 to 10000, specifies what share of the total radio PHY bandwidth is made available to the ARQ (Automatic Repeat Query) error-correction engine, rounded to the nearest value the ARQ engine actually supports. An admin raises this when the link needs more error-correction capacity, at the cost of bandwidth otherwise available for user data. For example, on a noisy link needing more retransmission headroom, an admin might raise cwrArqPctBw so more of the PHY's capacity is reserved for ARQ correction.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.4.1.1.1 snmpwalk -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrArqPctBw
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.4.1.1.1.1 snmpget -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrArqPctBw.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.136.1.4.1.1.1.1 i <value>
Start monitoring Cisco wireless point-to-point radio/bridge equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-IF-MIB::cwrArqPctBw OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-point radio/bridge equipment (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.136 | ciscoWirelessIfMIB | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1 | cwrRadioMibObjects | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.4 | cwrRadioPhyQualityGroup | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.4.1 | cwrPhyQualityTable | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.4.1.1 | cwrPhyQualityEntry | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.4.1.1.1 | cwrArqPctBw | CISCO-WIRELESS-IF-MIB |