All MIBs › CISCO-WIRELESS-IF-MIB › cwrArq3ByteErrs
cwrArq3ByteErrs
Module: CISCO-WIRELESS-IF-MIB
OID (symbolic): CISCO-WIRELESS-IF-MIB::cwrArq3ByteErrs
OID (numeric): 1.3.6.1.4.1.9.9.136.1.4.2.1.3
Node type: OBJECT-TYPE
Type: Counter64
Access: read-only
Description: This object identifies the number of consecutive 3 byte errors that were corrected since the the radio link reached linkOperational state.
What is cwrArq3ByteErrs?
This read-only Counter64 counts the number of consecutive 3-byte errors the ARQ engine has corrected since the radio link last reached the linkOperational state. As part of the family of per-length error counters, it helps an admin build a distribution of how long error bursts on this link tend to run. For example, a consistently low cwrArq3ByteErrs count relative to the shorter-length counters would suggest most correctable errors on this link are brief rather than sustained.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.4.2.1.3 snmpwalk -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrArq3ByteErrs
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.4.2.1.3.1 snmpget -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrArq3ByteErrs.1
Start monitoring Cisco wireless point-to-point radio/bridge equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-IF-MIB::cwrArq3ByteErrs OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-point radio/bridge equipment (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.136 | ciscoWirelessIfMIB | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1 | cwrRadioMibObjects | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.4 | cwrRadioPhyQualityGroup | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.4.2 | cwrPhyCorrectedBytesTable | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.4.2.1 | cwrPhyCorrectedBytesEntry | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.4.2.1.3 | cwrArq3ByteErrs | CISCO-WIRELESS-IF-MIB |