CISCO-WIRELESS-IF-MIB :: cwrAcquisitionMode

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-IF-MIBcwrAcquisitionMode

cwrAcquisitionMode

Module: CISCO-WIRELESS-IF-MIB

OID (symbolic): CISCO-WIRELESS-IF-MIB::cwrAcquisitionMode

OID (numeric): 1.3.6.1.4.1.9.9.136.1.3.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object specifies whether the radio should act as the master or as the slave. The slave radio tracks the master's frequency.

What is cwrAcquisitionMode?

This read-write INTEGER (master or slave) determines whether this radio acts as the frequency master of a point-to-point link or as the slave that tracks the master's frequency. Configuring both ends of a wireless link consistently, one as master and the other as slave, is required for the pair to synchronize and establish the link. For example, at a hub site a technician would set cwrAcquisitionMode to master(1), and at the remote end set it to slave(2), so the remote radio locks onto the hub's frequency.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.3.1.1.2
snmpwalk -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrAcquisitionMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.3.1.1.2.1
snmpget -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwrAcquisitionMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.136.1.3.1.1.2.1 i <value>

Start monitoring Cisco wireless point-to-point radio/bridge equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-IF-MIB::cwrAcquisitionMode OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-point radio/bridge equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.136ciscoWirelessIfMIBCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1cwrRadioMibObjectsCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.3cwrRadioBaseGroupCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.3.1cwrRadioBaseTableCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.3.1.1cwrRadioBaseEntryCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.3.1.1.2cwrAcquisitionModeCISCO-WIRELESS-IF-MIB