All MIBs › CISCO-WIRELESS-IF-MIB › cwr1SecTxArqCount
cwr1SecTxArqCount
Module: CISCO-WIRELESS-IF-MIB
OID (symbolic): CISCO-WIRELESS-IF-MIB::cwr1SecTxArqCount
OID (numeric): 1.3.6.1.4.1.9.9.136.1.6.6.1.8
Node type: OBJECT-TYPE
Type: Gauge32
Access: read-only
Description: This object represents cumulative number of unique ARQ's that were received by the transmit side of the local end at the time this entry was updated.
This provides an indication of how error free the transmisisons of the local end of the link are from the the remote end's perspective.
What is cwr1SecTxArqCount?
A Gauge32, read-only, counting the cumulative number of unique Automatic-Repeat-reQuest (ARQ) retransmission requests the local transmit side has received from the far end. Because this reflects how error-free the local end's outbound transmissions look from the remote's perspective, a high count signals the far end is frequently failing to decode what this radio sends. For example, a technician troubleshooting a one-way wireless problem would check whether cwr1SecTxArqCount is climbing on Site A's transmit side even though Site B's own receive counters look otherwise healthy, pointing at a TX-side issue back at Site A.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.6.6.1.8 snmpwalk -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwr1SecTxArqCount
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.6.6.1.8.1 snmpget -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwr1SecTxArqCount.1
Start monitoring Cisco wireless point-to-point radio/bridge equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-IF-MIB::cwr1SecTxArqCount OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-point radio/bridge equipment (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.136 | ciscoWirelessIfMIB | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1 | cwrRadioMibObjects | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.6 | cwrRadioMetricsGroup | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.6.6 | cwr1SecMetricsTable | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.6.6.1 | cwr1SecMetricsEntry | CISCO-WIRELESS-IF-MIB |
| 1.3.6.1.4.1.9.9.136.1.6.6.1.8 | cwr1SecTxArqCount | CISCO-WIRELESS-IF-MIB |