CISCO-WIRELESS-IF-MIB :: cwr1SecCorrectedSyncByteErrs

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-IF-MIBcwr1SecCorrectedSyncByteErrs

cwr1SecCorrectedSyncByteErrs

Module: CISCO-WIRELESS-IF-MIB

OID (symbolic): CISCO-WIRELESS-IF-MIB::cwr1SecCorrectedSyncByteErrs

OID (numeric): 1.3.6.1.4.1.9.9.136.1.6.6.1.10

Node type: OBJECT-TYPE

Type: Gauge32

Access: read-only

Description: This object represents the cumulative number of corrected sync byte errors, at the time this entry was updated.

What is cwr1SecCorrectedSyncByteErrs?

A Gauge32, read-only, tallying sync-byte errors that were detected and corrected in the radio frame during the interval. Sync bytes anchor the receiver's bit and frame alignment, so a rising corrected-error count warns that lock margin is shrinking even while the radio is still recovering automatically. For example, an engineer diagnosing intermittent drops on a point-to-point wireless hop would watch cwr1SecCorrectedSyncByteErrs for a steady climb in the minutes before an actual sync-loss event.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.6.6.1.10
snmpwalk -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwr1SecCorrectedSyncByteErrs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.136.1.6.6.1.10.1
snmpget -v2c -c public <target> CISCO-WIRELESS-IF-MIB::cwr1SecCorrectedSyncByteErrs.1

Start monitoring Cisco wireless point-to-point radio/bridge equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-IF-MIB::cwr1SecCorrectedSyncByteErrs OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-point radio/bridge equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.136ciscoWirelessIfMIBCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1cwrRadioMibObjectsCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.6cwrRadioMetricsGroupCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.6.6cwr1SecMetricsTableCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.6.6.1cwr1SecMetricsEntryCISCO-WIRELESS-IF-MIB
1.3.6.1.4.1.9.9.136.1.6.6.1.10cwr1SecCorrectedSyncByteErrsCISCO-WIRELESS-IF-MIB