CISCO-WBX-MEETING-MIB :: cwCommSystemResourceUsageMajorEvent

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-WBX-MEETING-MIB › cwCommSystemResourceUsageMajorEvent

cwCommSystemResourceUsageMajorEvent

Module: CISCO-WBX-MEETING-MIB

OID (symbolic): CISCO-WBX-MEETING-MIB::cwCommSystemResourceUsageMajorEvent

OID (numeric): 1.3.6.1.4.1.9.9.809.0.3

Node type: NOTIFICATION-TYPE

Description: This notification indicates that some system resource usage changes to the major status. System could send out this notification once one of the following cases happens: 1. The cwCommCPUUsage value of one CPU changes to be larger than or equal to the value of pre-defined CPU Major Threshold. 2. The cwCommMEMUsage value changes to be larger than or equal to the value of pre-defined MEM Major Threshold. 3. The cwCommMEMSwapUsage value changes to be larger than or equal to the value of pre-defined MEM Swap Major Threshold. 4. The cwCommFileUsage value changes to be larger than or equal to the value of pre-defined File Major Threshold. 5. The cwCommDiskUsage value of one disk changes to be larger than or equal to the value of pre-defined Disk Major Threshold.

The major notification means the system is in critical status, it needs the system administrator to take action immediately.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' CISCO-WBX-MEETING-MIB::cwCommSystemResourceUsageMajorEvent
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.9.9.809.0.3

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:62307->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (323125603) 37 days, 9:34:16.03
  SNMPv2-MIB::snmpTrapOID.0 = OID: CISCO-WBX-MEETING-MIB::cwCommSystemResourceUsageMajorEvent

Start monitoring Cisco WebEx collaboration hosts with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WBX-MEETING-MIB::cwCommSystemResourceUsageMajorEvent OID value, configure state conditions and alerts, and monitor any Cisco WebEx collaboration hosts from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.809ciscoWebExMeetingMIBCISCO-WBX-MEETING-MIB
1.3.6.1.4.1.9.9.809.0ciscoWebExMeetingMIBNotifsCISCO-WBX-MEETING-MIB
1.3.6.1.4.1.9.9.809.0.3cwCommSystemResourceUsageMajorEventCISCO-WBX-MEETING-MIB