All MIBs › CISCO-WAN-SRCP-MIB › srcpPeerTimeSinceHeartbeat
srcpPeerTimeSinceHeartbeat
Module: CISCO-WAN-SRCP-MIB
OID (symbolic): CISCO-WAN-SRCP-MIB::srcpPeerTimeSinceHeartbeat
OID (numeric): 1.3.6.1.4.1.351.150.11.1.1.3.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The time since the last heartbeat was received, in milliseconds. This represents the difference between the current time and the last time an SRCP command was received.
A value of 0 shall be returned if the heartbeat is not monitored. Even if the heartbeat is monitored, a value of 0 shall be returned if any of the following is true:
i) The system is locked or disabled (as indicated by mgAdministrativeState). ii) The srcpPeer is unassociated as indicated by mgcAssociationState(defined in CISCO-WAN-MG-MIB MIB).
If MGC Redundancy is supported, this object is not effective. Instead, the user should use srcpPeerGrpTimeSinceHeartbeat.
What is srcpPeerTimeSinceHeartbeat?
This read-only value reports, in milliseconds, how long it has been since the last SRCP command was received from this peer, returning 0 if heartbeat monitoring is disabled or if the system is locked/disabled. It gives an admin a live indicator of whether a specific SRCP peer connection is still active or has gone silent. For example, a steadily increasing value here well past the configured heartbeat interval would tell an operator that the media gateway controller has stopped communicating.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.150.11.1.1.3.1.5 snmpwalk -v2c -c public <target> CISCO-WAN-SRCP-MIB::srcpPeerTimeSinceHeartbeat
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.150.11.1.1.3.1.5.1 snmpget -v2c -c public <target> CISCO-WAN-SRCP-MIB::srcpPeerTimeSinceHeartbeat.1
Start monitoring Cisco WAN media gateways and controllers (MGX-based, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-SRCP-MIB::srcpPeerTimeSinceHeartbeat OID value, configure state conditions and alerts, and monitor any Cisco WAN media gateways and controllers (MGX-based, legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150 | ciscoWan | CISCOWAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.150.11 | ciscoWanSrcpMIB | CISCO-WAN-SRCP-MIB |
| 1.3.6.1.4.1.351.150.11.1 | srcpObjects | CISCO-WAN-SRCP-MIB |
| 1.3.6.1.4.1.351.150.11.1.1 | srcpAdminObjects | CISCO-WAN-SRCP-MIB |
| 1.3.6.1.4.1.351.150.11.1.1.3 | srcpPeerTable | CISCO-WAN-SRCP-MIB |
| 1.3.6.1.4.1.351.150.11.1.1.3.1 | srcpPeerEntry | CISCO-WAN-SRCP-MIB |
| 1.3.6.1.4.1.351.150.11.1.1.3.1.5 | srcpPeerTimeSinceHeartbeat | CISCO-WAN-SRCP-MIB |