CISCO-WAN-OPTIMIZATION-MIB :: cwoAoSmbxStatsWrSignLANBytes

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-OPTIMIZATION-MIBcwoAoSmbxStatsWrSignLANBytes

cwoAoSmbxStatsWrSignLANBytes

Module: CISCO-WAN-OPTIMIZATION-MIB

OID (symbolic): CISCO-WAN-OPTIMIZATION-MIB::cwoAoSmbxStatsWrSignLANBytes

OID (numeric): 1.3.6.1.4.1.9.9.762.1.3.2.29

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: This object contains the total number of original signed bytes written to LAN by SMB Application Optimizer since SMB Application Optimizer was started.

Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO.

What is cwoAoSmbxStatsWrSignLANBytes?

This read-only Counter64 contains the total original signed bytes written to the LAN by the SMB AO since it was started, with discontinuities possible at re-initialization, indicated by cwoAoStatsLastResetTime. An admin uses this as the original, pre-optimization write byte volume delivered to the local client side, useful for calculating the effective compression benefit when compared with the corresponding WAN-side write byte counter. A large gap between this and cwoAoSmbxStatsWrL4SignWANBytes demonstrates strong bandwidth savings for SMB write traffic.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.762.1.3.2.29
snmpwalk -v2c -c public <target> CISCO-WAN-OPTIMIZATION-MIB::cwoAoSmbxStatsWrSignLANBytes

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.762.1.3.2.29.1
snmpget -v2c -c public <target> CISCO-WAN-OPTIMIZATION-MIB::cwoAoSmbxStatsWrSignLANBytes.1

Start monitoring Cisco WAAS (Wide Area Application Services) appliance with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-OPTIMIZATION-MIB::cwoAoSmbxStatsWrSignLANBytes OID value, configure state conditions and alerts, and monitor any Cisco WAAS (Wide Area Application Services) appliance from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.762ciscoWanOptimizationMIBCISCO-WAN-OPTIMIZATION-MIB
1.3.6.1.4.1.9.9.762.1ciscoWanOptimizationMIBObjectsCISCO-WAN-OPTIMIZATION-MIB
1.3.6.1.4.1.9.9.762.1.3cwoAoCISCO-WAN-OPTIMIZATION-MIB
1.3.6.1.4.1.9.9.762.1.3.2cwoAoSmbxStatsCISCO-WAN-OPTIMIZATION-MIB
1.3.6.1.4.1.9.9.762.1.3.2.29cwoAoSmbxStatsWrSignLANBytesCISCO-WAN-OPTIMIZATION-MIB