All MIBs › CISCO-WAN-OPTIMIZATION-MIB › cwoAoSmbxStatsRdSignLANBytes
cwoAoSmbxStatsRdSignLANBytes
Module: CISCO-WAN-OPTIMIZATION-MIB
OID (symbolic): CISCO-WAN-OPTIMIZATION-MIB::cwoAoSmbxStatsRdSignLANBytes
OID (numeric): 1.3.6.1.4.1.9.9.762.1.3.2.28
Node type: OBJECT-TYPE
Type: Counter64
Access: read-only
Description: This object contains the total number of signed bytes read from LAN by SMB Application Optimizer since the SMB Application Optimizer was started.
Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO.
What is cwoAoSmbxStatsRdSignLANBytes?
This read-only Counter64 contains the total signed bytes read from the LAN by the SMB AO since it was started, with discontinuities possible at re-initialization, indicated by cwoAoStatsLastResetTime. An admin uses this to see the original, pre-optimization read byte volume on the local (client-facing) side, providing the baseline against which WAN-side savings from L4 optimization can be measured. Comparing this to cwoAoSmbxStatsRdL4SignWANBytes gives an admin a rough sense of the compression ratio achieved specifically for SMB read traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.762.1.3.2.28 snmpwalk -v2c -c public <target> CISCO-WAN-OPTIMIZATION-MIB::cwoAoSmbxStatsRdSignLANBytes
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.762.1.3.2.28.1 snmpget -v2c -c public <target> CISCO-WAN-OPTIMIZATION-MIB::cwoAoSmbxStatsRdSignLANBytes.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cwoAoSmbxStatsRdSignLANBytes.1
Start monitoring Cisco WAAS (Wide Area Application Services) appliance with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-OPTIMIZATION-MIB::cwoAoSmbxStatsRdSignLANBytes OID value, configure state conditions and alerts, and monitor any Cisco WAAS (Wide Area Application Services) appliance from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.762 | ciscoWanOptimizationMIB | CISCO-WAN-OPTIMIZATION-MIB |
| 1.3.6.1.4.1.9.9.762.1 | ciscoWanOptimizationMIBObjects | CISCO-WAN-OPTIMIZATION-MIB |
| 1.3.6.1.4.1.9.9.762.1.3 | cwoAo | CISCO-WAN-OPTIMIZATION-MIB |
| 1.3.6.1.4.1.9.9.762.1.3.2 | cwoAoSmbxStats | CISCO-WAN-OPTIMIZATION-MIB |
| 1.3.6.1.4.1.9.9.762.1.3.2.28 | cwoAoSmbxStatsRdSignLANBytes | CISCO-WAN-OPTIMIZATION-MIB |