All MIBs › CISCO-WAN-OPTIMIZATION-MIB › cwoAoSmbxStatsRdL4SignWANBytes
cwoAoSmbxStatsRdL4SignWANBytes
Module: CISCO-WAN-OPTIMIZATION-MIB
OID (symbolic): CISCO-WAN-OPTIMIZATION-MIB::cwoAoSmbxStatsRdL4SignWANBytes
OID (numeric): 1.3.6.1.4.1.9.9.762.1.3.2.26
Node type: OBJECT-TYPE
Type: Counter64
Access: read-only
Description: This object contains the total number of Layer 4 (L4) optimized signed bytes read from WAN by SMB Application Optimizer since the SMB Application Optimizer was started. L4 optimization comprises of TFO, DRE and LZ optimizations.
Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO.
What is cwoAoSmbxStatsRdL4SignWANBytes?
This read-only Counter64 contains the total Layer 4 (TFO, DRE, and LZ) optimized signed bytes read from the WAN by the SMB AO since it was started, with discontinuities possible at re-initialization, indicated by cwoAoStatsLastResetTime. An admin uses this to see how much SMB read traffic benefited from the full Layer 4 optimization stack rather than just SMB-specific caching. Comparing this to non-optimized WAN read volumes elsewhere would let an admin quantify the combined effect of L4 and SMB-level optimization together.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.762.1.3.2.26 snmpwalk -v2c -c public <target> CISCO-WAN-OPTIMIZATION-MIB::cwoAoSmbxStatsRdL4SignWANBytes
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.762.1.3.2.26.1 snmpget -v2c -c public <target> CISCO-WAN-OPTIMIZATION-MIB::cwoAoSmbxStatsRdL4SignWANBytes.1
Start monitoring Cisco WAAS (Wide Area Application Services) appliance with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-OPTIMIZATION-MIB::cwoAoSmbxStatsRdL4SignWANBytes OID value, configure state conditions and alerts, and monitor any Cisco WAAS (Wide Area Application Services) appliance from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.762 | ciscoWanOptimizationMIB | CISCO-WAN-OPTIMIZATION-MIB |
| 1.3.6.1.4.1.9.9.762.1 | ciscoWanOptimizationMIBObjects | CISCO-WAN-OPTIMIZATION-MIB |
| 1.3.6.1.4.1.9.9.762.1.3 | cwoAo | CISCO-WAN-OPTIMIZATION-MIB |
| 1.3.6.1.4.1.9.9.762.1.3.2 | cwoAoSmbxStats | CISCO-WAN-OPTIMIZATION-MIB |
| 1.3.6.1.4.1.9.9.762.1.3.2.26 | cwoAoSmbxStatsRdL4SignWANBytes | CISCO-WAN-OPTIMIZATION-MIB |