CISCO-WAN-OPTIMIZATION-MIB :: cwoAoSmbxStatsRACacheHitRate

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-OPTIMIZATION-MIBcwoAoSmbxStatsRACacheHitRate

cwoAoSmbxStatsRACacheHitRate

Module: CISCO-WAN-OPTIMIZATION-MIB

OID (symbolic): CISCO-WAN-OPTIMIZATION-MIB::cwoAoSmbxStatsRACacheHitRate

OID (numeric): 1.3.6.1.4.1.9.9.762.1.3.2.16

Node type: OBJECT-TYPE

Type: Gauge32

Access: read-only

Description: This object contains SMB Application Optimizer Read Ahead cache hit rate since it was started.

Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO.

What is cwoAoSmbxStatsRACacheHitRate?

This read-only Gauge32, as a percentage from 0 to 100, contains the SMB AO's Read Ahead cache hit rate since it was started, with discontinuities possible at re-initialization, indicated by cwoAoStatsLastResetTime. An admin uses this as the normalized efficiency metric for read-ahead caching, easier to compare across sites or time periods than the raw hit count. A declining hit rate over time would prompt an admin to review whether file access patterns have become less predictable or the cache needs resizing.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.762.1.3.2.16
snmpwalk -v2c -c public <target> CISCO-WAN-OPTIMIZATION-MIB::cwoAoSmbxStatsRACacheHitRate

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.762.1.3.2.16.1
snmpget -v2c -c public <target> CISCO-WAN-OPTIMIZATION-MIB::cwoAoSmbxStatsRACacheHitRate.1

Start monitoring Cisco WAAS (Wide Area Application Services) appliance with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-OPTIMIZATION-MIB::cwoAoSmbxStatsRACacheHitRate OID value, configure state conditions and alerts, and monitor any Cisco WAAS (Wide Area Application Services) appliance from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.762ciscoWanOptimizationMIBCISCO-WAN-OPTIMIZATION-MIB
1.3.6.1.4.1.9.9.762.1ciscoWanOptimizationMIBObjectsCISCO-WAN-OPTIMIZATION-MIB
1.3.6.1.4.1.9.9.762.1.3cwoAoCISCO-WAN-OPTIMIZATION-MIB
1.3.6.1.4.1.9.9.762.1.3.2cwoAoSmbxStatsCISCO-WAN-OPTIMIZATION-MIB
1.3.6.1.4.1.9.9.762.1.3.2.16cwoAoSmbxStatsRACacheHitRateCISCO-WAN-OPTIMIZATION-MIB