CISCO-WAN-OPTIMIZATION-MIB :: cwoAoHttpxStatsTotalRTT

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-OPTIMIZATION-MIBcwoAoHttpxStatsTotalRTT

cwoAoHttpxStatsTotalRTT

Module: CISCO-WAN-OPTIMIZATION-MIB

OID (symbolic): CISCO-WAN-OPTIMIZATION-MIB::cwoAoHttpxStatsTotalRTT

OID (numeric): 1.3.6.1.4.1.9.9.762.1.3.3.2

Node type: OBJECT-TYPE

Type: CiscoMilliSeconds

Access: read-only

Description: This object indicates total Round Trip Time (RTT) for all the connections going through HTTP AO since it was started.

Discontinuities in the value of this counter can occur at re-initialization of the HTTP AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the HTTP AO.

What is cwoAoHttpxStatsTotalRTT?

This read-only CiscoMilliSeconds object indicates total Round Trip Time for all connections going through the HTTP AO since it was started, with discontinuities possible at re-initialization, indicated by cwoAoStatsLastResetTime for the HTTP AO. An admin uses this as an aggregate latency measure across all HTTP-optimized traffic, useful for spotting broad degradation trends in web application responsiveness over the WAN. A rising cumulative RTT beyond what traffic growth alone would explain would point to worsening path latency rather than an HTTP AO issue.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.762.1.3.3.2
snmpwalk -v2c -c public <target> CISCO-WAN-OPTIMIZATION-MIB::cwoAoHttpxStatsTotalRTT

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.762.1.3.3.2.1
snmpget -v2c -c public <target> CISCO-WAN-OPTIMIZATION-MIB::cwoAoHttpxStatsTotalRTT.1

Start monitoring Cisco WAAS (Wide Area Application Services) appliance with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-OPTIMIZATION-MIB::cwoAoHttpxStatsTotalRTT OID value, configure state conditions and alerts, and monitor any Cisco WAAS (Wide Area Application Services) appliance from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.762ciscoWanOptimizationMIBCISCO-WAN-OPTIMIZATION-MIB
1.3.6.1.4.1.9.9.762.1ciscoWanOptimizationMIBObjectsCISCO-WAN-OPTIMIZATION-MIB
1.3.6.1.4.1.9.9.762.1.3cwoAoCISCO-WAN-OPTIMIZATION-MIB
1.3.6.1.4.1.9.9.762.1.3.3cwoAoHttpxStatsCISCO-WAN-OPTIMIZATION-MIB
1.3.6.1.4.1.9.9.762.1.3.3.2cwoAoHttpxStatsTotalRTTCISCO-WAN-OPTIMIZATION-MIB