CISCO-WAN-OPTIMIZATION-MIB :: cwoAoHttpxStatsAKCBypassCacheTrans

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-OPTIMIZATION-MIBcwoAoHttpxStatsAKCBypassCacheTrans

cwoAoHttpxStatsAKCBypassCacheTrans

Module: CISCO-WAN-OPTIMIZATION-MIB

OID (symbolic): CISCO-WAN-OPTIMIZATION-MIB::cwoAoHttpxStatsAKCBypassCacheTrans

OID (numeric): 1.3.6.1.4.1.9.9.762.1.3.3.10.1.1

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: This object indicates the Akamai connected cache statistics for total number of cache-bypass transactions that were handled in bypass mode transparent cache profile. When bypass mode transparent cache profile is set for a particular hostname, the caching for the hostname specified in a rule is suppressed. In this mode, the cache-engine turns off caching for one or more configured sites.

What is cwoAoHttpxStatsAKCBypassCacheTrans?

This read-only Counter64, in requests, indicates the Akamai connected cache statistics for total number of cache-bypass transactions handled in bypass mode transparent cache profile, where caching for a specified hostname is suppressed and the cache-engine turns off caching for one or more configured sites. An admin uses this to confirm how many transactions for explicitly bypass-configured hostnames actually passed through without caching, verifying the bypass policy is being honored. If this counter stays at zero despite a bypass profile being configured for a busy hostname, an admin would check whether the profile is actually being matched against incoming traffic.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.762.1.3.3.10.1.1
snmpwalk -v2c -c public <target> CISCO-WAN-OPTIMIZATION-MIB::cwoAoHttpxStatsAKCBypassCacheTrans

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.762.1.3.3.10.1.1.1
snmpget -v2c -c public <target> CISCO-WAN-OPTIMIZATION-MIB::cwoAoHttpxStatsAKCBypassCacheTrans.1

Start monitoring Cisco WAAS (Wide Area Application Services) appliance with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-OPTIMIZATION-MIB::cwoAoHttpxStatsAKCBypassCacheTrans OID value, configure state conditions and alerts, and monitor any Cisco WAAS (Wide Area Application Services) appliance from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.762ciscoWanOptimizationMIBCISCO-WAN-OPTIMIZATION-MIB
1.3.6.1.4.1.9.9.762.1ciscoWanOptimizationMIBObjectsCISCO-WAN-OPTIMIZATION-MIB
1.3.6.1.4.1.9.9.762.1.3cwoAoCISCO-WAN-OPTIMIZATION-MIB
1.3.6.1.4.1.9.9.762.1.3.3cwoAoHttpxStatsCISCO-WAN-OPTIMIZATION-MIB
1.3.6.1.4.1.9.9.762.1.3.3.10cwoAoHttpxStatsAKCCISCO-WAN-OPTIMIZATION-MIB
1.3.6.1.4.1.9.9.762.1.3.3.10.1cwoAoHttpxStatsAKCBypassEntryCISCO-WAN-OPTIMIZATION-MIB
1.3.6.1.4.1.9.9.762.1.3.3.10.1.1cwoAoHttpxStatsAKCBypassCacheTransCISCO-WAN-OPTIMIZATION-MIB