All MIBs › CISCO-WAN-MGC-REDUN-MIB › mgcRedGrpProtResponseAckAttr
mgcRedGrpProtResponseAckAttr
Module: CISCO-WAN-MGC-REDUN-MIB
OID (symbolic): CISCO-WAN-MGC-REDUN-MIB::mgcRedGrpProtResponseAckAttr
OID (numeric): 1.3.6.1.4.1.351.150.22.1.3.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description: Every command from the MGC could contain Response Acknowledgement attribute. This attribute consists a list of transaction IDs which are acknowledged by the Call agent. The gateway on receiving this can free up the resources attached to this transaction ID.
When this attribute is present in the Gateway response, it should contain an empty list of transaction ID. This attribute in the response from the Gateway is to invite a response acknowledgement message from the MGC for this response. This will be present in the final response sent by the gateway only when a provisional response had been sent prior to this final response for the same transaction.
This object determines whether the Gateway should include response acknowledgement in the final response. This object does not determine the capability of the Gateway to receive response acknowledgement attribute as part of MGC commands.
'sendResponseAckAttr' - Gateway will include response acknowledgement attribute as part of final response when a provisional response had been sent earlier.
'notSendResponseAckAttr' - Gateway will not include response acknowledgement attribute as part of final response when a provisional response had been sent earlier.
The default value will be 'sendResponseAckAttr' for MGCP 1.0 protocol and 'notSendResponseAckAttr' for every other protocol.
This object has no relevance when the protocol is SRCP.
What is mgcRedGrpProtResponseAckAttr?
This read-create INTEGER, set to sendResponseAckAttr(1) or notSendResponseAckAttr(2), controls whether the gateway's responses include the Response Acknowledgement attribute that lists transaction IDs the call agent has acknowledged, letting the gateway free up resources tied to those transactions, and per the description this attribute must contain an empty transaction ID list when present in the gateway's own response. An admin configures this per protocol per MGC group to align resource-cleanup signaling behavior with what the call agent expects. If an admin disables this and gateway resources tied to acknowledged transactions aren't being freed promptly, that setting would be a first place to check.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150 | ciscoWan | CISCOWAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.150.22 | ciscoWanMgcRedunMIB | CISCO-WAN-MGC-REDUN-MIB |
| 1.3.6.1.4.1.351.150.22.1 | mgcRedundancyObjects | CISCO-WAN-MGC-REDUN-MIB |
| 1.3.6.1.4.1.351.150.22.1.3 | mgcRedundancyGrpProtocolTable | CISCO-WAN-MGC-REDUN-MIB |
| 1.3.6.1.4.1.351.150.22.1.3.1 | mgcRedundancyGrpProtocolEntry | CISCO-WAN-MGC-REDUN-MIB |
| 1.3.6.1.4.1.351.150.22.1.3.1.6 | mgcRedGrpProtResponseAckAttr | CISCO-WAN-MGC-REDUN-MIB |