All MIBs › CISCO-WAN-FEEDER-MIB › cwfFeederType
cwfFeederType
Module: CISCO-WAN-FEEDER-MIB
OID (symbolic): CISCO-WAN-FEEDER-MIB::cwfFeederType
OID (numeric): 1.3.6.1.4.1.351.150.15.1.1.1.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This identifies the feeeder type. fdrNON(12) is applicable when cwfLMIType is xLMI(2). Other values are applicable for cwfLMIType = feeder(1).
The possible values are: fdrIPX -- Feeder is an IPX node in a routing network fdrBPX -- Feeder is an BPX node in a routing network fdrIpxAF -- Feeder is a stand-alone IPX node fdrBASIS -- Feeder is a stand-alone BASIS node fdrUNKNOWN -- Feeder is unknown fdrUNI -- Feeder is a UNI AIT (phase 0) fdrAPS -- Feeder is an APS (Adjunct Processor Shelf) fdrIGX -- Feeder is an IGX node in a routing network fdrIgxAF -- Feeder is a stand-alone IGX node fdrVSI -- Feeder is an VSI Controller fdrPAR -- Feeder is a PAR fdrNON -- Non-feeder type
What is cwfFeederType?
This read-only enumerated object identifies the feeder's type from a list of Cisco WAN switch platform variants such as fdrIPX, fdrBPX, fdrIpxAF, fdrBASIS, fdrUNI, fdrAPS, and fdrIGX, among others, though its description field is empty in the source MIB. An administrator would use this value to know what kind of switch platform is acting as the feeder, since management and troubleshooting steps can differ by platform type. For example, an engineer preparing to run platform-specific diagnostics on a feeder would first check this object to confirm whether it is, for instance, a BPX or an IGX-based feeder.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.150.15.1.1.1.1.8 snmpwalk -v2c -c public <target> CISCO-WAN-FEEDER-MIB::cwfFeederType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.150.15.1.1.1.1.8.1 snmpget -v2c -c public <target> CISCO-WAN-FEEDER-MIB::cwfFeederType.1
Start monitoring Cisco BPX/IGX/MGX-family ATM WAN switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-FEEDER-MIB::cwfFeederType OID value, configure state conditions and alerts, and monitor any Cisco BPX/IGX/MGX-family ATM WAN switches (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150 | ciscoWan | CISCOWAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.150.15 | ciscoWanFeederMIB | CISCO-WAN-FEEDER-MIB |
| 1.3.6.1.4.1.351.150.15.1 | cwfMIBObjects | CISCO-WAN-FEEDER-MIB |
| 1.3.6.1.4.1.351.150.15.1.1 | cwfFeeder | CISCO-WAN-FEEDER-MIB |
| 1.3.6.1.4.1.351.150.15.1.1.1 | cwfFeederTable | CISCO-WAN-FEEDER-MIB |
| 1.3.6.1.4.1.351.150.15.1.1.1.1 | cwfFeederEntry | CISCO-WAN-FEEDER-MIB |
| 1.3.6.1.4.1.351.150.15.1.1.1.1.8 | cwfFeederType | CISCO-WAN-FEEDER-MIB |