CISCO-WAN-AXIPOP-MIB :: vismAal2CidICSEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-AXIPOP-MIBvismAal2CidICSEnable

vismAal2CidICSEnable

Module: CISCO-WAN-AXIPOP-MIB

OID (symbolic): CISCO-WAN-AXIPOP-MIB::vismAal2CidICSEnable

OID (numeric): 1.3.6.1.4.1.351.110.5.5.3.4.1.1.15

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This object is used to enable or disable the Idle Channel Suppresion for a cid. This can be specified while adding the cid and cannot be modified.

When the Idle Channel Suppression is enabled the DSP will look for the idle cas (ABCD bits) pattern specified in ds0IdleCode in dsx0 MIB. If the idle pattern is present the DSP stops generating voice packets towards ATM side. By default the ds0IdleCode will be zero unless the user has configured it before adding the cid. If the ds0IdleCode is changed after the cid is added it will have no affect unless the card is reset.

Idle Channel Suppression is applicable only for trunking application, In case of switching there is no need for Idle channel Suppression as the calls are teared down and set up dynamically.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.3.4.1.1.15
snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::vismAal2CidICSEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.3.4.1.1.15.1
snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::vismAal2CidICSEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.5.3.4.1.1.15.1 s <value>

Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::vismAal2CidICSEnable OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.5basisServicesBASIS-MIB
1.3.6.1.4.1.351.110.5.5voiceBASIS-MIB
1.3.6.1.4.1.351.110.5.5.3vismChanGrpBASIS-MIB
1.3.6.1.4.1.351.110.5.5.3.4vismAal2CidGrpCISCO-VISM-ATM-TRUNK-MIB
1.3.6.1.4.1.351.110.5.5.3.4.1vismAal2CidCnfTableCISCO-VISM-ATM-TRUNK-MIB
1.3.6.1.4.1.351.110.5.5.3.4.1.1vismAal2CidEntryCISCO-VISM-ATM-TRUNK-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.5.5.3.4.1.1.15vismAal2CidICSEnableCISCO-WAN-AXIPOP-MIB