All MIBs › CISCO-WAN-AXIPOP-MIB › pxmAtmVcCrossConnectH2LOperStatus
pxmAtmVcCrossConnectH2LOperStatus
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::pxmAtmVcCrossConnectH2LOperStatus
OID (numeric): 1.3.6.1.4.1.351.110.5.2.16.11.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The value of this object identifies the current operational status of the VC cross-connect in one direction; (i.e., from the high to low direction). The up and down states indicate that this ATM VC cross-connect from high to low direction is operational or not operational respectively. The unknown state indicates that the state of it cannot be determined.
What is pxmAtmVcCrossConnectH2LOperStatus?
This read-only value reports the operational status, up(1), down(2), or unknown(3), of the cross-connect in the high-to-low direction, the counterpart to pxmAtmVcCrossConnectL2HOperStatus. Checking both directional status objects together tells an admin whether a PVC problem is a full outage or a one-directional fault. A PVC with the high-to-low direction down but low-to-high up would mean traffic can flow from the high-indexed interface to the low one but not back.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.16.11.1.10 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::pxmAtmVcCrossConnectH2LOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.16.11.1.10.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::pxmAtmVcCrossConnectH2LOperStatus.1
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::pxmAtmVcCrossConnectH2LOperStatus OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2 | atm | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.2.16 | pxmAtmMIBObjects | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.16.11 | pxmAtmVcCrossConnectTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.16.11.1 | pxmAtmVcCrossConnectEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.16.11.1.10 | pxmAtmVcCrossConnectH2LOperStatus | CISCO-WAN-AXIPOP-MIB |