All MIBs › CISCO-WAN-AXIPOP-MIB › ingrUpcPCR0
ingrUpcPCR0
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::ingrUpcPCR0
OID (numeric): 1.3.6.1.4.1.351.110.5.2.2.1.1.1.25
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Peak Cell Rate for CLP=0 cells. The actual value depends on the speed of the logical port (which can be a T1, E1 (normal), E1 (clear), IMA T1, IMA E1 (normal) or IMA E1 (clear) port. Note that the IMA port's speed is variable and depends on the number of links in the port. In AUSM (4-port), maximum value is 4830.
What is ingrUpcPCR0?
This read-write integer sets the Peak Cell Rate enforced specifically against CLP=0 (higher-priority, non-discardable) cells, separate from the combined CLP[0+1] rate set by ingrUpcPCR01, and is likewise bounded by the logical port's actual speed. Admins use this to give higher-priority traffic its own, typically tighter, peak-rate ceiling distinct from the overall connection ceiling. For example, a connection might have a higher combined PCR01 to allow overall bursting, while ingrUpcPCR0 caps just the CLP=0 portion to protect against a source flooding only high-priority-marked cells.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.2.1.1.1.25 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::ingrUpcPCR0
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.2.1.1.1.25.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::ingrUpcPCR0.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.2.2.1.1.1.25.1 i <value>
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::ingrUpcPCR0 OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2 | atm | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2.2 | ausmChan | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.2.2.1 | ausmChanCnfGrp | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.2.1.1 | ausmChanCnfGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.2.1.1.1 | ausmChanCnfGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.2.1.1.1.25 | ingrUpcPCR0 | CISCO-WAN-AXIPOP-MIB |