All MIBs › CISCO-WAN-AXIPOP-MIB › ingrQCLPThreshLow
ingrQCLPThreshLow
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::ingrQCLPThreshLow
OID (numeric): 1.3.6.1.4.1.351.110.5.2.2.1.1.1.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This variable sets the lower threshold for dropping CLP set cells in the ingress direction. In AUSM (4-port card), the valid range is from 1..8000.This value should be less than or equal to ingrQCLPThreshHigh. Default value depends on the ingrQDepth.
What is ingrQCLPThreshLow?
This read-write integer sets the lower of the two CLP-based discard thresholds for the ingress queue, and per the MIB's own rule must be less than or equal to ingrQCLPThreshHigh, together forming a two-stage (hysteresis-style) discard policy for CLP-tagged cells. Admins configure the gap between the low and high thresholds to control how aggressively CLP-tagged cells get dropped as queue occupancy rises and falls, smoothing out discard behavior rather than having a single hard cutoff. For example, a wider gap between ingrQCLPThreshLow and ingrQCLPThreshHigh creates a gentler discard ramp as congestion builds and subsides.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.2.1.1.1.14 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::ingrQCLPThreshLow
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.2.1.1.1.14.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::ingrQCLPThreshLow.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.2.2.1.1.1.14.1 i <value>
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::ingrQCLPThreshLow OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2 | atm | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2.2 | ausmChan | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.2.2.1 | ausmChanCnfGrp | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.2.1.1 | ausmChanCnfGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.2.1.1.1 | ausmChanCnfGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.2.1.1.1.14 | ingrQCLPThreshLow | CISCO-WAN-AXIPOP-MIB |