All MIBs › CISCO-WAN-AXIPOP-MIB › imaPortEnable
imaPortEnable
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::imaPortEnable
OID (numeric): 1.3.6.1.4.1.351.110.5.2.1.1.4.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This variable enables, disables or modifies the configuration of the port 1 - delport (Disables the entire IMA group) 2 - addport (Enables the IMA group) 3 - addlinks (Adds links to an existing IMA group) 4 - dellinks (Deletes links from an existing IMA group) 5 - modify (Modifies parameters in an existing IMA group)
An IMA group is synonymous with an IMA port. To configure an IMA port, the different lines in the IMA port should be enabled and then the IMA port should be added using the enumeration 'addport'. To delete an IMA port, the enumeration 'delport' should be used. To increase the bandwidth of an IMA group, the enumeration 'addlinks' should be used. To decrease the bandwidth of an IMA group, the enumeration 'dellinks' should be used. 'modify' is used to change parameters other than links in the IMA group
What is imaPortEnable?
This read-write INTEGER, one of delport(1), addport(2), addlinks(3), dellinks(4), or modify(5), enables, disables, or reconfigures an IMA group, which is synonymous with an IMA port. An administrator writes addport(2) to bring up a new bundle of T1/E1 links as a single logical IMA interface, or dellinks(4) to shrink an existing bundle by removing member links. For example, an operator adding a fifth T1 line to an existing four-line IMA group would use addlinks(3) to incorporate it without tearing down the whole group.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.1.1.4.1.1.2 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::imaPortEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.1.1.4.1.1.2.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::imaPortEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.2.1.1.4.1.1.2.1 i <value>
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::imaPortEnable OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2 | atm | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2.1 | ausmPort | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2.1.1 | ausmPortCnf | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.2.1.1.4 | ausmPortCnfPortImaGrp | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.1.1.4.1 | ausmPortCnfPortImaGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.1.1.4.1.1 | ausmPortCnfPortImaGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.1.1.4.1.1.2 | imaPortEnable | CISCO-WAN-AXIPOP-MIB |