CISCO-WAN-AXIPOP-MIB :: chanOAMstatus192

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-AXIPOP-MIBchanOAMstatus192

chanOAMstatus192

Module: CISCO-WAN-AXIPOP-MIB

OID (symbolic): CISCO-WAN-AXIPOP-MIB::chanOAMstatus192

OID (numeric): 1.3.6.1.4.1.351.110.3.19.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Bit map indicating Ras_oam_lpbk test state of 32 channels from chanPacketNumber * 256 + 176 to chanPacketNumber * 256 + 207 MSB represent lower channel and LSB represent higher channel 0 in bit position indicate lpbk test ok 1 in bit position indicate lpbk test failed This object cannot be set or read

What is chanOAMstatus192?

This is a bitmap, delivered via trap and not directly readable or settable, indicating the RAS-OAM loopback test state for 32 channels from chanPacketNumber times 256 plus 176 through plus 207, with 0 meaning pass and 1 meaning failed. An administrator's monitoring tooling decodes this field to isolate loopback test failures in this channel range. For example, if only channels within this specific bit range show failures across repeated traps, an engineer would suspect a localized cabling or timeslot issue rather than a card-wide fault.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.3.19.7
snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::chanOAMstatus192

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.3.19.7.1
snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::chanOAMstatus192.1

Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::chanOAMstatus192 OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.3cardSpecificBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.3.19rasOamLpbkInfoCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.3.19.7chanOAMstatus192CISCO-WAN-AXIPOP-MIB