All MIBs › CISCO-WAN-AXIPOP-MIB › chanIngrXmtUtilization
chanIngrXmtUtilization
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::chanIngrXmtUtilization
OID (numeric): 1.3.6.1.4.1.351.110.5.2.2.3.1.1.19
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description: The percentage utilization of the reserved bandwidth (PCR). Statistics collected after UPC and ingress queueing.
What is chanIngrXmtUtilization?
This read-only gauge reports the percentage of the channel's reserved PCR bandwidth actually being used after UPC policing and ingress queueing, the post-processing counterpart to chanIngrRcvUtilization. Admins use this as the "final" utilization figure that reflects what's actually being delivered onward, which should generally not exceed 100% since policing has already been applied by this measurement point. For example, if chanIngrXmtUtilization stays near 100% while chanIngrRcvUtilization is well above 200%, the admin can confirm UPC policing is effectively capping the connection's forwarded traffic at its contracted rate.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.2.3.1.1.19 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::chanIngrXmtUtilization
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.2.3.1.1.19.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::chanIngrXmtUtilization.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> chanIngrXmtUtilization.1
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::chanIngrXmtUtilization OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2 | atm | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2.2 | ausmChan | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.2.2.3 | ausmChanCntGrp | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.2.3.1 | ausmChanCntGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.2.3.1.1 | ausmChanCntGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.2.3.1.1.19 | chanIngrXmtUtilization | CISCO-WAN-AXIPOP-MIB |