All MIBs › CISCO-WAN-AXIPOP-MIB › bearerJitter

bearerJitter

OID (symbolic): CISCO-WAN-AXIPOP-MIB::bearerJitter

OID (numeric): 1.3.6.1.4.1.351.110.5.5.9.1.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute defines the jitter (a.k.a interarrival jitter) This value is determined by the DSP and obtained by the HOST processor upon querying the DSP on a periodic basis. This value is expressed in units of milliseconds. Currently this object is not used.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.9.1.1.9
snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::bearerJitter

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.9.1.1.9.1
snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::bearerJitter.1

Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::bearerJitter OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.351	stratacom	CISCOWAN-SMI
1.3.6.1.4.1.351.110	basis	BASIS-MIB
1.3.6.1.4.1.351.110.5	basisServices	BASIS-MIB
1.3.6.1.4.1.351.110.5.5	voice	BASIS-MIB
1.3.6.1.4.1.351.110.5.5.9	bearerConnGrp	CISCO-VISM-ATM-TRUNK-MIB
1.3.6.1.4.1.351.110.5.5.9.1	bearerConnTable	CISCO-VISM-ATM-TRUNK-MIB
1.3.6.1.4.1.351.110.5.5.9.1.1	bearerConnEntry	CISCO-VISM-ATM-TRUNK-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.351.110.5.5.9.1.1.9	bearerJitter	CISCO-WAN-AXIPOP-MIB

CISCO-WAN-AXIPOP-MIB :: bearerJitter

bearerJitter

Also defined in

Module

This MIB depends on