All MIBs › CISCO-WAN-AXIPOP-MIB › bbIfMaxCellRatePct
bbIfMaxCellRatePct
Module: CISCO-WAN-AXIPOP-MIB
OID (symbolic): CISCO-WAN-AXIPOP-MIB::bbIfMaxCellRatePct
OID (numeric): 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The maximum cell rate allowed for the port in terms of percentage. Must be greater than or equal to bbIfIngrPctBandwidth. The default is 100 percent.
What is bbIfMaxCellRatePct?
This read-write setting caps the maximum cell rate this port may use, expressed as a percentage, and must be set no lower than bbIfIngrPctBandwidth since the reserved bandwidth can't exceed the permitted maximum. It acts as a ceiling on top of the per-direction bandwidth reservations, useful for limiting a port's overall throughput below its physical maximum. An admin wanting to cap a port's usage at 80 percent of line rate, even though 100 percent is the default, would lower bbIfMaxCellRatePct to 80.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.10 snmpwalk -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::bbIfMaxCellRatePct
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.10.1 snmpget -v2c -c public <target> CISCO-WAN-AXIPOP-MIB::bbIfMaxCellRatePct.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.10.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> bbIfMaxCellRatePct.1
Start monitoring Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-AXIPOP-MIB::bbIfMaxCellRatePct OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (AXIPOP processor, legacy) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2 | atm | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2.6 | bbInterface | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.2.6.1 | bbIfCnf | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.2.6.1.1 | bbIfCnfPortGrp | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.6.1.1.1 | bbIfCnfPortGrpTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1 | bbIfCnfPortGrpEntry | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.110.5.2.6.1.1.1.1.10 | bbIfMaxCellRatePct | CISCO-WAN-AXIPOP-MIB |